Catalyst can be used in the following processes:
A.benzene hydrogenation to cyclohexane.
it can hydrogenate about 100% benzene to less than 100ppm.
B.phenol hydrogenation to cyclohexanol.
C.Hydrotreating of industry coarse hexane and other solvent oil.
D.Hydrogenation of white oil.
E.Hydrogenation of lube.
F.organic sulfides removal of liquid hydrocarbon.
Catalyst is mainly used for hydrogenation of unsaturated aliphatic hydrocarbon, aromatic hydrocarbon and organic sulfides removal of liquid hydrocabon. After hydrogenation, the content of remained aromatic hydrocarbon or unsaturated hydrocarbon can be decreased to ppm grade, and the sulfides content of liquid hydrocarbon can be decreased to less than 0.1ppm.
The catalyst has been successfully used in many industry units. its comprehensive performance is superior to the same kind of products.
Physical and chemical properties:
item | target | item | target |
Appearance | black tablet | Nickel , wt% | min 42% |
Particle size ,mm | ∮5.0×5.0±0.5 |
|
|
Chemical composition | nickel- alumina | Surface area, m2/g | 80-180 |
Crushing strength, N/cm | 130min
| Bulk density, kg/l | 0.90-1.30 |
Reference operating conditions(for benzene hydrogenation):
Process parameters
| Hydrogen partial pressure ,Mpa | temperature,℃ | Space velocity,hr-1 | Hydrogen to benzene molecular ratio |
0.1-2.0 | 120-230 | 0.1-4.0 | 3.5-10 | |
Raw material | Benzene content,0.1-100%; Balance, cyclohexane
| |||
Packing: iron drums innerlining double-layer plastic bags
Please leave a message for us or use the following ways to contact us, we will reply to you as soon as possible, and provide you with the most sincere service, thank you.
日本语
한국어
Français
Deutsch
España
Türkiye